Solar panels are developed to receive the sunlight effectively; however, during severe weather conditions like sandstorms, their performance can be minimal. In areas such as Karachi, which are susceptible to dust, sandstorms cause coats of fines, silt, and debris covering panel surfaces, which bar sunlight and reduce energy production nearly instantly. Cleaning following a sandstorm must include proper water-based cleaning to restore efficiency, safeguard panel surfaces and avoid long-term damaged materials.
Specialised firms in the cleaning business, like Solar Sweep, deal with clean-up techniques used in the aftermath of storms that do not damage the panel glass or finishes, but clean them out safely.
The Effect of Sandstorms on the Solar Panels
Sandstorms cause greater damage than dust itself. The fine sand particles attach well to the surfaces of solar panels and are deposited in microscopic grooves, thus being hard to remove with a dry technique or light rinsing.
The main issues caused by the sandstorms are:
- Less sunlight is taken up because of the blockage on the surface.
- High temperature of the panel reduces efficiency.
- Risks of abrasion in the event of sand being wiped incorrectly.
- Up to 25% potential loss in output in case it is not cleaned.
This is the reason why professional Solar panel cleaning after a sandstorm is critical towards the restoration of power generation.
Why Water Cleaning Is Essential After a Sandstorm
It is likely that dry brushing or air blowing can blow away some surface dust, but cannot get rid of the film of fine dust deposited after a sandstorm. The use of controlled cleaning water helps to move and remove such particles without grinding them into the glass.
Water has advantages of cleaning, which include:
- Total elimination of thin layers of sand.
- Micro-scratches on panel glass were prevented.
- Recovery of light transmission.
- Anti-reflective coating protection.
This technique has gained a lot of popularity with professional Solar Cleaning Services as it can put the panels back to their best performance soon after the harsh weather.
Deioniser Water: The Secret to Successful Post-Storm Cleaning
Squeegeeing sandstorms with tap water would even exacerbate the issue by leaving traces of minerals with its evaporation. Deionised water, on the other hand, does not have any dissolved minerals; hence, it is best to use it in cleaning solar panels.
The benefit of cleaning with deionised water:
- No residue or streaks were present after drying.
- Greater attachment of dust and sand.
- Smaller use of water and greater output.
- Long-term health and practicality of the panel.
This is the technique applied by Solar Sweep to do more than just restore their output and ensure that the storm does not damage their panels.
Safe Cleaning Techniques for Sand-Covered Panels
Sand particles can be coarse, and, therefore, the technique is equally important as the water quality. To be able to avoid damage, professional cleaners use low-pressure rinsing and soft-bristle brushes.
Competent cleaning standards involve:
- Light prior rinsing to loosen sand.
- On the soft side of the brush (no pressure agitation).
- Final rinse with pure water
- Drying in the sunlight to leave no trace.
It is these regulated practices that distinguish reputable Solar Cleaning Companies in Karachi from unclean, unprofessional cleaning efforts.
The Time of the Day: Cleaning after a Sandstorm.
The passage of time between sandstorms and cleaning contributes to the sand solidifying onto the panel surface, particularly when sand is combined with moisture or pollution. This is due to the fact that immediate cleaning recovers the output quicker, and oil does not build up.
Timely cleaning helps:
- Quickly regain lost energy generation.
- Stop the sand from sticking to the coats.
- Minimise long-term service expenses.
- Extend panel lifespan
Property owners seek Solar Cleaning Services near me following storms; however, the right choice will involve trained people who will make sure the job is done at the first instance.
Why Solar Sweep Is Trusted for Post-Storm Cleaning
The Solar panels Cleaning after sandstorms through Solar Sweep is done in an organised, scientific manner, so that the panels do not damage up to a point of losing their maximum efficiency. They have trained technicians who know the weather patterns in the areas and make appropriate modifications in cleaning methods. Solar Sweep has been known to be the best solar company in Karachi in providing reliable services via accuracy, safety, and environmentally friendly practices, which makes them one of the best solar panel cleaning services in the harsh environment.
Conclusion
Solar panels generally suffer greatly at the hands of sandstorms, although the effect can be reversed quickly and efficiently by water cleaning performed by experts. The use of deionised water, durable apparatus and mastery of techniques enables the fine sand to be picked without damaging panel surfaces. By using Solar sweep, an experienced Solar Cleaning Services company, it is guaranteed that the panels will cure soon, perform their functions effectively and will not get damaged permanently. Solar systems keep on providing clean and reliable power with appropriate maintenance after each sandstorm, which maintains your investment over the years.
